D3 And D5 Sliding Gate Motor

Centurion D3 DC Sliding Gate Operator Cost effective DC operator for domestic gates up to 300kg in mass.

Centurion D5 DC Sliding Gate Operator Cost effective DC operator for domestic gates up to 500kg in mass.

The thoroughbred range of DC operators offer swift and reliable sliding gate control. The D3 unit is powered by a high torque DC motor coupled to a custom built gearbox. The system uses a 12V maintenance free battery as the primary power source.

The battery is charged via a mains supply or solar panel.

The principle features of the system are:

• CUSTOM BUILT GEARBOX – made from advanced engineering materials for corrosion-free strength and durability.

• REVOLUTIONARY INTERNAL LIMIT SWITCH (DOSS) – for pin point stopping and easy installation. Novel gate referenced origin ensures that the end limit positions are never lost even if the gate is accidentally knocked off its rail and repositioned differently.

• SENSITIVE ANTI CRUSHING CONTROL – for greater safety.

• PROVEN SURGE AND LIGHTNING PROTECTION – for added reliability.

• INTERNAL MANUAL RELEASE – with lockable access door for greater security.

• UNINTERRUPTED OPERATION – using safe low voltage battery driven DC motor.

• FAST OPERATING SPEED – offers greater security and convenience with smooth acceleration and deceleration.

• MULTIPLE FEATURES – to suit a wide variety of applications. At the core of the CENTURION slider is the electronic controller.

The controller used in the D3 unit is the CP80 Controller.

• Motor Voltage 12V DC Starting

• Thrust 35kgF Rated

• Thrust 12kgF

• Operating speed at rated thrust 15m/min

• Gate usage Maximum 20 operations per day

• Anti-crushing sensing Electronic only Maximum gate mass 300kg

A10 Heavy Duty Sliding Gate Motor

The new A10 operator is in a class of its own, using a high-torque 3-phase motor and custom designed frequency inverter to provide a fully speed-controlled system capable of moving industrial gates weighing up to 2 tons. On gates up to 1000kg the normal operating speed is a swift 16metres per minute. On lighter gates, thanks to the frequency inverter this speed can be increased to 30m/minute. The unit can be operated almost continuously when fitted with an optional cooling fan. Power failure protection for the A10 is achieved by simply adding an innovative DC converter module with standby battery.

Smooth acceleration and deceleration

The inverter / 3- phase motor combination provides silky-smooth ramp up to full speed and slow down to a fully controlled stop.

Rapid operation

with intelligent speed control For the ultimate combination of security and safety, the controller can be programmed to open suitable gates at up to 30 metres per minute but close at a slower and safer speed of 16 metres per minute.

Very high starting and running thrust

The three-phase motor combined with inverter control provides radically improved starting and running torques compared

to the single-phase capacitor start motors typically used in most gate motor applications.

High gate mass capacity

The rugged diecast aluminium gearbox is designed to handle heavy industrial gates with high inertial loads.

Fan cooled unit for very high duty cycle capability

Duty cycles of up to 100% are possible with a unit fitted with optional cooling fan. Battery back-up capability using innovative DC converter In applications which require power failure protection, a DC-to-DC converter with standby battery can be readily added.

Internal limit switch system ensures pin-point stopping

There are no external limit switches to fit or adjust. The well-known DOSS system (Digital origin seeking system) keeps track of the gate position at all times.

Sensitive anti-crushing control

Although the inverter controlled 3 phase motor is capable of delivering a large driving force, the control electronics accurately monitors the applied load to provide sensitive anti-crushing protection.

Reliable 3 phase induction motor runs on single phase power

The unit uses a 3-phase motor for optimum simplicity, reliability and operating performance. Combined with the frequency inverter the unit can be conveniently connected to a standard single-phase 220V supply.

FEATURES

• Gearbox height adjustment of 10mm using convenient jacking bolts
• Forwards and backwards position adjustment of 30mm
• Unimpeded access to mounting bolts when lockable cover is removed
• Dedicated cable entry point allows easy removal of gearbox for maintenance
• Logic controller and power inverter housed inside protected plastic enclosures under the main cover
• Flap out logic controller tray for easy commissioning
• Convenient plug in connectors for both logic controller and power inverter
• Lockable manual override prevents removal of cover * Jam free manual release operation
• Multiple programme modes: standard, reversing, condominium, PIRAC
• Selectable automatic closing with pushbutton override (adjustable time)
• Adjustable speed modes from 16 to 30m/min. Open and closing speed can be programmed independently. (gate mass limited, refer to specifications below) Optional Auxiliaries
• Pedestrian opening (adjustable opening and auto-close time)
• Remote gate status indicator (gate position, multiple collision detection, over temperature and light status)
• Courtesy / Pillar light timer with multi mode pre-flashing option (adjustable time) Safety beam input
• Holiday lock-out
• Free exit facility
• DC converter for standby battery back-up operation. Unit housed in separate weatherproof enclosure.
  
• Installation manual.